Flat-panel display mounted flush on a VSYS push-pull wall mount against a modern wall

What Is a Push-Pull TV Mount and Why Do Video Walls Need Them?

By Mounts.ae Editorial Team

A push-pull mount holds a display flush against the wall like a fixed mount, but lets the whole panel slide forward on rails and lock back with a simple push or pull motion, giving technicians rear access to cabling and connections without removing the display. Video walls need this because every panel in a multi-screen array must stay serviceable without dismantling the whole installation.

Request a Quote or message us on WhatsApp to find the right push-pull mount for your video wall.

Why Video Wall Arrays Need Push-Pull Specifically

A single fixed display is straightforward to service, since removing one panel does not affect anything else. A video wall array is different: every panel sits edge to edge with its neighbors, and pulling one panel off a fixed mount to service it disturbs the alignment of the entire array. A push-pull mount solves this by letting each panel slide forward independently on its own rails, giving full rear access without touching the panels around it or breaking the array's alignment.

How the Mechanism Works

VSYS push-pull mounts use a press or pull motion to release a spring or pop-out lock, extending the panel off the wall on sliding rails, then a push locks it back flush. The VSVW02-46T covers 37"-70" displays up to 45 kg with a 215mm pop-out extension. The VSVW13-46T covers 45"-70" displays up to 70 kg with toolless tilt adjustment. The VSVW13-610TW scales up to 120" displays and 130 kg, the right fit for most large-format video wall panels.

Keeping Bezels Aligned Across an Array

Video walls depend on every panel sitting at the exact same plane and spacing for the bezels to line up cleanly. VSYS push-pull mounts include lateral shift brackets and micro-adjustment leveling built in, which matter more on a video wall than on a single display, since a small misalignment on one panel is visible against every panel around it.

When You Do Not Need a Push-Pull Mount

A permanently sealed single display with no OPS module, no serviceable cabling behind it, and no plan to ever access the rear of the panel does not need the extra mechanism a push-pull mount provides. A standard fixed mount is the simpler, lower-profile fit for that case.

Browse the full Push-Pull Wall Mounts range, or request a quote for your video wall project.

Frequently asked questions

What makes a push-pull mount different from a fixed mount?

A push-pull mount lets the display slide forward on rails for rear access, then lock back flush against the wall, while a fixed mount holds the display in one static position with no movement at all. Push-pull suits displays that need periodic rear access; fixed mounts suit permanent, sealed installations.

Why do video walls specifically need push-pull mounts?

In a multi-panel video wall array, each panel sits edge to edge with its neighbors. A push-pull mount lets a technician service one panel by sliding it forward independently, without disturbing the alignment of the panels around it, which a fixed mount cannot do.

Does a push-pull mount affect bezel alignment across a video wall?

No, when installed correctly. VSYS push-pull mounts include lateral shift brackets and micro-adjustment leveling specifically to keep every panel's bezel aligned with its neighbors, which matters more on a video wall than a single display.

How much wall clearance does a push-pull video wall mount need?

VSYS push-pull mounts extend up to 215mm off the wall when pulled forward, depending on the model. Confirm the room has enough floor clearance in front of the array for that motion before specifying push-pull mounts for a tight installation.

Where can I buy push-pull mounts for a video wall in the UAE?

Mounts.ae supplies push-pull video wall mounts across the UAE, rated from 45 kg up to 130 kg per panel. Request a quote or message us on WhatsApp with your video wall's panel count and sizes for a recommendation.

Back to blog