Request a quote for any mount below via WhatsApp or the product page. Quotes are handled directly, no pricing shown online.
Push-pull mounts let an interactive flat panel extend off the wall for full rear access to cabling and connections, then lock back flush against the wall once the work is done. For popular interactive screens like the Samsung Flip Pro WM75B, SMART Board SBID-GX165 and SBID-GX186, ViewSonic ViewBoard IFP7550, BenQ RM7502K, and Clevertouch UX Pro2 X75SF, a push-pull mount from VSYS keeps the panel close to the wall during normal use and pulls forward in seconds whenever a technician needs to get behind it.
Why Rear Access Matters More for Interactive Screens Than for a Standard TV
Interactive flat panels carry more behind the screen than a typical commercial TV: OPS slot-in PCs, USB extenders, HDMI matrix cabling, microphone and camera modules, and network drops that get serviced or swapped far more often than on a passive display. A fixed mount that holds the panel flush against the wall makes every one of those tasks a two-person job with the panel lifted off the wall plate entirely. A push-pull mount solves this by keeping the panel on its bracket at all times. It just moves.
Pros of Push-Pull Mounts for Interactive Screens
-
Rear access without removing the panel: the display stays on the bracket the entire time, so a technician can reach the OPS slot, cabling, or a rear USB port without a second person supporting the screen.
-
Fast, tool-free operation: VSYS push-pull mounts use a press-to-release or push-pull lock mechanism. No tools are needed to extend or retract the panel once it's installed.
-
Flush profile when idle: once locked back, the panel sits close to the wall (as little as 68mm on the VSVW02-46T), keeping the classroom or boardroom aesthetic clean between service visits.
-
Built-in alignment tools: lateral shift brackets and micro-adjustment leveling let installers square up the panel precisely, which matters more on a touch-sensitive interactive display than on a passive screen.
-
Security: anti-theft locking holes and locking structures, standard across the VSYS push-pull range, matter for panels installed in shared or public-facing spaces like schools, training centers, and lobbies.
Cons of Push-Pull Mounts for Interactive Screens
-
Needs clearance in front of the panel: the display extends up to 215mm off the wall when pulled out (190mm on the VSVW13-46T, 215mm on the VSVW02-46T), so the room needs enough floor clearance for that motion, which matters in tight classrooms or narrow corridors.
-
More moving parts than a fixed mount: the pop-out lock mechanism has more components than a simple fixed bracket, so it benefits from the same periodic inspection any moving hardware needs.
-
Unnecessary if rear access is never needed: a permanently sealed installation with no OPS module, no serviceable cabling, and no plan to ever access the rear of the panel doesn't need the extra mechanism a push-pull mount provides. A fixed mount is the simpler fit there.
-
Slightly deeper installed profile than the lowest-profile fixed mounts: even locked back, a push-pull mount's retracted depth (68mm on the VSVW02-46T) is typically a little deeper than a dedicated ultra-low-profile fixed mount built with no moving parts at all (as low as 30mm on the VS01A-46F).
How VSYS Push-Pull Mounts Are Built
Every VSYS push-pull mount in this range shares the same core mechanism: a press or pull motion releases a spring or pop-out lock, extending the panel off the wall on sliding rails, then a push locks it back flush. The load-bearing steel construction is strength-tested to four times the rated capacity across the range, and models like the VSVW13-46T include toolless tilt adjustment (+2 to -3 degrees) so the viewing angle can be fine-tuned after the panel is already mounted and wired.
Matching a VSYS Push-Pull Mount to Your Interactive Screen
The right model comes down to three real numbers: the panel's screen size, its weight, and its VESA hole pattern. Here's how eight widely used interactive flat panel models line up against the VSYS push-pull range, based on each manufacturer's published specifications:
| Interactive Screen |
Size |
Weight |
VESA Pattern |
VSYS Mount |
| SMART Board SBID-GX165 (GX 65") |
65" |
~42 kg |
600x400mm |
VSVW13-46T (45"-70", 70 kg, VESA to 604x405mm) |
| Samsung Flip Pro WM75B |
75" |
~75.2 kg |
400x400mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
| ViewSonic ViewBoard IFP7550 |
75" |
~53.4 kg |
800x400mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
| BenQ RM7502K |
75" |
~54.4 kg |
800x400mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
| SMART Board SBID-GX186 (GX 86") |
86" |
~77 kg |
800x600mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
| Newline TT-8626QULT (Q Ultra 86") |
86" |
~59.5 kg |
800x400mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
| Clevertouch UX Pro2 X75SF (Item 1541230/2) |
75" |
~56.73 kg |
800x400mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
| Clevertouch IMPACT Plus2 X75SF Gen2 (Item 1541238/2) |
75" |
~51.95 kg |
800x400mm |
VSVW13-610TW (up to 120", 130 kg, VESA to 1000x600mm) |
Most 75" and 86" interactive panels use an 800x400mm or 800x600mm VESA pattern, which is wider than the VSVW02-46T and VSVW13-46T support, so the VSVW13-610TW is the right fit for that size class: it covers displays up to 120" and 130 kg with VESA support up to 1000x600mm, well beyond what any of these panels weigh. Always confirm your exact model's weight and VESA pattern against the manufacturer's own spec sheet before ordering, since manufacturers occasionally revise these between hardware revisions of the same model name.
VSVW02-46T: Push-Pull Video Wall Mount, 37"-70", up to 45 kg
The lightest-duty option in the range, well suited to smaller interactive panels and video wall tiles up to 45 kg, with VESA support from 200x200mm to 600x400mm and a 215mm pop-out extension. View the VSVW02-46T.
VSVW13-46T: Push-Pull Video Wall Mount, 45"-70", up to 70 kg
Built for mid-size interactive panels like the SMART Board SBID-GX165 (65"), with portrait or landscape orientation and 13.5mm depth micro-adjustment for precise alignment. View the VSVW13-46T.
VSVW13-610TW: Push-Pull Video Wall Mount, up to 120", up to 130 kg
The best-suited option for most 75" and 86" interactive flat panels on the market today, given its 130 kg rating and VESA support up to 1000x600mm, wide enough to cover the 800x400mm and 800x600mm patterns common on this size class. View the VSVW13-610TW.
Browse the full range in the Push-Pull Wall Mounts collection.
Installing Interactive Screens in the UAE and GCC
Interactive flat panels are increasingly standard in UAE schools, training centers, corporate boardrooms, and control rooms across Dubai, Abu Dhabi, and the wider GCC, and most of these installations involve an OPS module or AV-over-IP cabling that gets serviced more than once over the panel's working life. Mounts.ae supplies push-pull mounting hardware for system integrators, facilities teams, and education technology providers across the region, with professional installation available UAE-wide on request through the quote form on each product page.
Why Source Your Push-Pull Mount from Mounts.ae
- Genuine VSYS build quality, backed by a 1-year replacement warranty covering manufacturing defects and product malfunctions
- Fast delivery across Dubai, Abu Dhabi, and the wider UAE and GCC
- Optional professional installation available UAE-wide, requested on the same quote form
- Dedicated guidance for AV integrators, education technology providers, and facilities teams sourcing at scale
- Flexible quotes for bulk, corporate, and project-based orders
Related Reading
Ready to fit your interactive display with a push-pull mount? Request a quote via WhatsApp or browse the full Push-Pull Wall Mounts range.
