Low Cost Full-Motion TV Wall Mount for 14"-43" TVs, Up to 25 kg (SH-200P)

Package Contents

1x SH-200P full-motion wall mount bracket, 1x TV-side VESA mounting plate, TV mounting screws (multiple sizes), wall mounting screws and anchors, printed installation instructions.

Warranty

This product is covered by Mounts.ae's flat 1-year replacement warranty, covering manufacturing defects and product malfunctions. It does not cover normal usage wear, misuse, or damage from improper installation. Contact our team with your order details if an issue arises within the warranty period and we will arrange a replacement.

Sustainability

The SH-200P is built from cold-rolled steel, a fully recyclable material, and designed for long-term durability rather than disposable use. Choosing a wall mount over a bulky TV stand also reduces overall material use and furniture waste in the home or office.

Expandability

The SH-200P's 75x75mm to 200x200mm VESA range covers most 14 to 43 inch TVs, so the same mount can carry a replacement or upgraded screen later as long as the new TV's VESA pattern and weight fall within these limits. For larger future upgrades beyond 43 inches, Mounts.ae carries full-motion mounts rated for bigger screens and higher weight capacities.

Distribution

Mounts.ae distributes the SH-200P across the UAE, with professional installation available as an add-on service. Reach out through the quote form or WhatsApp for stock availability, pricing, and delivery timelines to your location.

The SH-200P is designed for TVs from 14 to 43 inches, provided the screen has a VESA hole pattern between 75x75mm and 200x200mm on the back panel. Before ordering, check your TV's rear panel or user manual for its exact VESA spacing to confirm compatibility, since screen size alone does not guarantee a matching bolt pattern. Most TVs in this size range use one of the standard patterns this mount supports.

The SH-200P has a maximum weight capacity of 25 kg (55 lbs). This rating accounts for the full-motion arm extended to its maximum reach, which places more stress on the bracket than a fixed position. Always weigh your TV, including any included stand hardware left attached to the VESA mounting holes, and stay within this limit for safe long-term use.

The single articulating arm extends from a minimum of 75mm to a maximum of 430mm off the wall surface. This range lets you position the screen close to the wall for a slim profile when not viewing, or pull it out and swivel it toward a seating area, kitchen counter, or corner for better viewing angles.

Yes. The SH-200P offers tilt adjustment of +15 degrees to -15 degrees for reducing glare from overhead lighting or windows, plus swivel movement of roughly +45 degrees to -45 degrees so the screen can be angled toward different parts of a room. Both adjustments are made by hand after installation and hold position through friction tension in the arm joints, no tools needed for day-to-day repositioning.

The SH-200P is constructed from cold-rolled steel with a fine-texture black powder coat finish, chosen for a balance of strength and a clean, low-profile appearance. The finish resists scratches and corrosion in typical indoor environments and blends into most wall colors and TV bezels without drawing attention.

Each SH-200P ships with the full-motion mounting bracket, the TV-side VESA plate, mounting screws for both the TV and wall stud, and a printed instruction sheet. Anchors suited to concrete or masonry walls are included for typical UAE wall construction, though it is always worth confirming your wall type before installation so the correct hardware is used.

Yes. Mounts.ae offers professional installation as an add-on service across the UAE, with pricing quoted based on your wall type, TV size, and location. You can request it by checking the Installation option on the quote form or by mentioning it in your WhatsApp message, and our team will confirm scheduling and pricing directly with you.

The SH-200P can be installed on either wall type, but the mounting method differs. On concrete or masonry, the included anchors thread directly into the wall. On drywall, the bracket must be secured into wooden or metal wall studs using the mounting holes provided, since drywall alone cannot support the combined weight of the TV and arm safely.

The SH-200P is covered by Mounts.ae's flat 1-year replacement warranty, covering manufacturing defects and product malfunctions. It does not cover normal wear, misuse, or damage from improper installation. If you experience an issue within the warranty period, contact us with your order details and we will arrange a replacement.