Low Cost Full-Motion TV Wall Mount for 10"-32" TVs, Up to 20 kg (SH-21P)

Package Contents

1x SH-21P full-motion wall mount bracket, 1x TV-side VESA mounting plate, TV mounting screws, wall mounting screws and anchors, compartmented hardware polybag, printed installation instructions.

Warranty

This product is covered by Mounts.ae's flat 1-year replacement warranty, covering manufacturing defects and product malfunctions. It does not cover normal usage wear, misuse, or damage from improper installation. Contact our team with your order details if an issue arises within the warranty period and we will arrange a replacement.

Sustainability

The SH-21P combines steel and plastic components chosen for durability over disposability, reducing the need for frequent replacement. Choosing a wall mount over a bulky TV stand also cuts down on overall material use and furniture waste in the home or office.

Expandability

The SH-21P's 100x100mm VESA pattern and 20kg capacity suit most 10 to 32 inch TVs, so the same mount can carry a replacement screen later as long as the new TV matches this VESA size and weight limit. For larger future upgrades, Mounts.ae carries full-motion mounts rated for bigger screens and higher VESA patterns.

Distribution

Mounts.ae distributes the SH-21P across the UAE, with professional installation available as an add-on service. Reach out through the quote form or WhatsApp for stock availability, pricing, and delivery timelines to your location.

The SH-21P is designed for TVs from 10 to 32 inches, provided the screen has a 100x100mm VESA hole pattern on the back panel. Check your TV's rear panel or manual to confirm the exact VESA spacing before ordering, since not every TV in this size range uses the same bolt pattern. Both flat and curved screens within this size range are supported.

The SH-21P has a maximum weight capacity of 20 kg (44 lbs). This rating applies with the arm fully extended, which puts more load on the bracket than a flush position against the wall. Weigh your TV, including any stand hardware left attached to the VESA holes, and stay within this limit for safe use.

The single articulating arm extends from a minimum of 60mm to a maximum of 325mm off the wall surface. This lets the screen sit close and low-profile when not in use, then pull out and swivel toward a seating area or corner of the room when needed.

Yes. The SH-21P offers tilt adjustment of +15 degrees to -15 degrees to reduce glare from windows or overhead lighting, plus a wide swivel range of plus or minus 90 degrees so the screen can face different parts of a room. Both movements are adjusted by hand and hold position through friction in the arm joints.

The SH-21P is built from a combination of steel and plastic components with a matte black powder coat finish on the visible steel parts. This construction keeps the mount lightweight and affordable while still supporting its full 20 kg weight rating.

Each SH-21P ships with the full-motion mounting bracket, TV-side VESA plate, mounting screws for the TV and wall stud, a compartmented polybag hardware kit, and printed instructions. Anchors suited to concrete or masonry walls are included for typical UAE wall construction, though it is worth confirming your wall type before installation.

Yes. Mounts.ae offers professional installation as an add-on service across the UAE, with pricing quoted based on your wall type, TV size, and location. Request it by checking the Installation option on the quote form or mentioning it in your WhatsApp message, and our team will confirm scheduling and pricing directly.

The SH-21P can be installed on either wall type, but the method differs. On concrete or masonry, the included anchors thread directly into the wall. On drywall, the bracket must be secured into wooden or metal studs using the mounting holes provided, since drywall alone cannot reliably support the combined weight of the TV and arm.

The SH-21P is covered by Mounts.ae's flat 1-year replacement warranty, covering manufacturing defects and product malfunctions. It does not cover normal wear, misuse, or damage from improper installation. If an issue comes up within the warranty period, contact us with your order details and we will arrange a replacement.