Planning a Microsoft Teams Signature Room with a 105-inch 21:9 display? Request a quote or WhatsApp our team for a room-specific mounting recommendation.
Microsoft's own room planning guidance recommends mounting large conference-room displays 48-54 inches from the floor to screen center, the range that keeps Front Row's eye-level video tiles at natural eye height for seated participants. A 105-inch 21:9 display such as the Avocor AVL-1050 weighs 99kg with a 1000 x 400mm VESA pattern, both figures that sit right at the edge of what most standard heavy-duty mounts are rated for, which is why hardware selection for a Signature Room display needs a specific weight and VESA check rather than assuming a generic "large TV mount" covers it. The VSYS VS01XL-810T's 1000 x 800mm maximum VESA range comfortably clears the pattern, but its 100kg weight cap and stated 60-100 inch screen range both sit close enough to this display's actual numbers that we recommend confirming compatibility with our team before ordering.
Why Front Row Changes the Mounting Height Calculation
Front Row splits the screen into a video strip for remote participants and content below it, so the display's vertical center needs to land at seated eye height, not the room's geometric center, or remote attendees appear to look down at the table.
Per Microsoft's Teams Rooms planning guidance, the target is 48-54 inches from the floor to screen center for larger displays, which for a 105-inch 21:9 panel usually means mounting it noticeably lower on the wall than a same-width 16:9 display would sit, since the 21:9 panel is shorter top-to-bottom for the same diagonal size. Camera placement should track the same eye-level logic, positioned as close to screen center as the hardware allows, reinforcing natural sightlines during the call. Check the current Microsoft Teams Rooms planning guidance for the latest room geometry recommendations before finalizing a layout.
Matching Mount Hardware to a 105-Inch 21:9 Display's Real Specs
The Avocor AVL-1050's 1000 x 400mm VESA pattern and 99kg weight both need a mount with genuine margin above those numbers, not a mount rated exactly to the panel's class.
| Spec |
Avocor AVL-1050 (105" 21:9) |
VSYS VS01XL-810T |
| VESA pattern |
1000 x 400 mm |
Up to 1000 x 800 mm max |
| Weight |
99 kg |
Rated to 100 kg |
| Stated screen range |
105" diagonal |
60"-100" (listed range) |
| Certification |
ā |
UL approved, 4x strength-tested |
The VESA pattern clears with real margin on both axes. The weight rating and stated screen range are close enough to the display's actual figures, 99kg against a 100kg cap, and a 105" panel against a mount listed for up to 100", that we treat this as a case requiring direct confirmation rather than an automatic fit. Request a quote with your exact display model and we'll confirm the right hardware before you order.
Planning the Fit-Out Sequence for a Signature Room
A 99kg display on a wall this size almost always needs the load-path planning covered in our Dubai building codes guide, backing plates or direct stud attachment, decided during construction, not as an afterthought during AV install.
Signature Room fit-outs typically involve coordinating the display mounting height, camera placement, and curved or angled table geometry together, since moving any one of the three after installation is expensive. Confirm the display's exact mounting height against Microsoft's current Front Row guidance, the wall's load-path readiness, and the mount's real weight/VESA margin before the room's furniture and AV are both locked in. Browse Full-Motion & Articulating Mounts for the broader heavy-duty range if a different weight class fits your specific display.
Related Reading
See also: Dubai Building Codes for AV Integrators: Load Capacity on Gypsum Drywall for planning the wall's load path before a display this heavy goes up.
Frequently Asked Questions
What height should a Teams Room display be mounted at?
Microsoft's Teams Rooms planning guidance recommends 48-54 inches from the floor to screen center for larger displays, keeping Front Row's video tiles at natural eye height for seated participants. Smaller displays use a slightly lower 42-48 inch range.
What is the VESA pattern on a 105-inch 21:9 display like the Avocor AVL-1050?
The Avocor AVL-1050 uses a 1000 x 400mm VESA pattern and weighs 99kg. A mount needs both a VESA range covering 1000 x 400mm and a weight rating with real margin above 99kg, not a mount rated exactly to that figure.
Does the VSYS VS01XL-810T fit a 105-inch 21:9 display?
Its 1000 x 800mm maximum VESA range clears the pattern comfortably, but its 100kg weight cap and stated 60-100 inch screen range both sit close to this display's actual 99kg weight and 105" diagonal. We recommend confirming compatibility with our team before ordering rather than treating it as an automatic fit.
Why does Front Row change where the display should be mounted?
Front Row shows remote participants as an eye-level video strip, so the display's vertical center needs to align with seated eye height rather than the room's geometric center. Mounting too high makes remote attendees appear to look down at the table during calls.
Should I plan the wall structure before choosing a mount for a heavy Teams Room display?
Yes. A display in the 90-100kg range on a drywall partition typically needs backing plates or direct stud attachment planned during construction, not decided during AV installation. Confirm the load path before the room's furniture and mounting hardware are both finalized.
